Jhm Hot Mbr Membrane Bioreactor with PVDF Membrane for Water Filtration Treatment

Customization: Available
After-sales Service: Online Support,video Technical Support
Application: Biotechnology Industry, Chemical Industry, Clinical Diagnosis, Food and Beverage Industry, Food Safety, Forensic Science, Pharmaceutical Industry, Water Treatment Industry, Industry

Products Details

  • Overview
  • Product Description
  • Detailed Photos
  • Product Parameters
  • Apllication
  • Company Profile
Overview

Basic Info.

Model NO.
JHM MBRII20C
Cleaning Method
Automated Cleaning
Filtration Capacity
500 L/hr
Certification
ISO9001, SGS
Salt Rejection Rate
99.99%
Capacity
250L/Hour
Outersize(mm)
630*36*2000mm
Link CalibreΦ
32
Transport Package
Wooden Carton
Specification
250L/hour
Trademark
Jhui
Origin
Shandong, China
HS Code
8421999000
Production Capacity
10000 Sets Per Month

Packaging & Delivery

Package Size
16.00cm * 6.00cm * 5.00cm
Package Gross Weight
10.000kg

Product Description

Product Description

EDI equipment (Electric ion exchange device) uses RO production water as the inlet water, which can replace the traditional ion exchange device to continuously produce water, ultra-pure water, and the resistivity can reach 10-18 ohm /cm.
EDI device is an EDI unit formed by filling and clamping ion exchange resin between anion/cation exchange membrane.The EDI module separates a certain number of EDI units with a network to form a concentrated water chamber, and sets negative/positive electrodes at both ends of the EDI unit group.Under the promotion of direct current, the water flows into the fresh water chamber, and the anions and cations in the water respectively pass through the anion/cation exchange membrane into the concentrated water chamber and are discharged as concentrated water.
 

Detailed Photos

Jhm Hot Mbr Membrane Bioreactor with PVDF Membrane for Water Filtration Treatment

Product Parameters
Min-style EDI module
Style No. Capacity Effluent quality
EDI-P-50L 50L/H 15MΩ•cm
EDI-P-100L 100L/H 15MΩ•cm
EDI-P-200L 200L/H 15MΩ•cm
EDI-P-250L 250L/H 15MΩ•cm
HP Series EDI module
EDI-P&F-0.5-HP 0.5T/H 15MΩ•cm
EDI-P&F-1.0-HP 1.0T/H 15MΩ•cm
EDI-P&F-2.0-HP 2.0T/H 15MΩ•cm
EDI-P&F-3.0-HP 3.0T/H 15MΩ•cm
EDI-P&F-4.0-HP 4.0T/H 15MΩ•cm
LX Series(Can replace Siemens original EDI module)
LX-04Z 0.5T/H 15MΩ•cm
LX-10Z 1.0T/H 15MΩ•cm
LX-18Z 2.0T/H 15MΩ•cm
LX-24Z 2.5T/H 15MΩ•cm
LX-30Z 3.0T/H 15MΩ•cm
LX-45Z 5.0T/H 15MΩ•cm

 

Apllication

EDI technology is a cost revolution in water treatment industry, its biggest characteristic is to use electricity instead of using acid and alkali to regenerate resin, so it is very economical and practical, can have limited energy consumption to obtain stable ultrapure water.It has the advantages of stable effluent quality, low operating cost, convenient operation and management, and small occupation area. Since the industrialization of EDI technology in 1986, it has been widely used in the fields of medicine, electronics, electric power, electroplating and coating.

1)The biopharmaceutical industry purifies water;
2)Electronic semiconductor, photovoltaic industry high pure water, ultra-pure water;3)Power plant boiler industry water;
4)Power plant boiler industry water;
5)Fine machinery industry ultrapure water;
6)The preparation of electroplating bath and cleaning water for electroplating parts in 7)Electroplating and coating industry;
8)Ultra pure water for battery industry
 

Company Profile

Jhm Hot Mbr Membrane Bioreactor with PVDF Membrane for Water Filtration Treatment

 

 

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours